M12 female recept. C-cod. front

PP-wires 3x0.75 0.5m

Kontakt oss for leveringsdato

Spørsmål

Flange female
M12, 3-pole
C-coded
Front mounting
with multi-strand wire

Cable length	0,5 m

Side 1

Electrical data | Supply

Operating voltage AC max.	250 V
Operating voltage DC max.	250 V
Current operating per contact max.	4 A

Diagnostics

Status indication LED	no

Installation | Connection

Mounting set	M16 x 1.5

Device protection | Electrical

Additional condition protection degree	inserted, screwed
Pollution Degree	3
Rated surge voltage	2,5 kV
Material group (IEC 60664-1)	I

Mechanical data | Material data

Mechanical data | Mounting data

Mounting method	inserted, screwed

Environmental characteristics | Climatic

Operating temperature min.	-25 °C
Operating temperature max.	85 °C
Additional condition temperature range	depending on cable quality

Important installation notes

Note on strain relief	Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties.
Note on bending radius	Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.

General data | Cable

Cable identification	930

Structure | Cable

wire arrangement	black 1, black 2, green-yellow

Mechanical data | Cable

Material wire insulation	PP
Amount wires	3
Outer diameter insulation	1,85 mm
Outer diameter tolerance core insulation	± 5 %
Conductor crosssection (wire)	0,75 mm²

Temperature range | Cable

Min. operating temperature (static)	-40 °C
Max. operating temperature (fixed)	80 °C
Operating temperature min. (dynamic)	-25 °C
Operating temperature max. (dynamic)	80 °C

Resistances | Cable

Flame resistance	UL 1581 § 1100 FT2 \| UL 1581 § 1090 \| IEC 60332-2-2
chemical resistance	Good, application-related testing
Gasoline resistance	Good, application-related testing
Oil resistance	Good, application-related testing \| DIN EN 60811-404

Installation | Cable

Bending radius (fixed)	5 x Outer diameter
Bending radius (dynamic)	10 x Outer diameter